Unigrip Type Blind Rivets introduction
Unigrip Rivets:High shearing strength and tensile strength which can provide the solid and vibration resistant connection. Provide the large blind side bearing area to be close to rear plate. The mandrel pressure bearing load/riveting load are dispersed on the blind side sheets which makes it to be ideally used in sheet materials.
Material: Alu/Steel. Steel/Steel .Sts/Sts.
Payment term: TT, LC
How to Use
The rivet assembly is inserted into a hole drilled through the parts to be joined and a specially designed tool is used to draw the mandrel into the rivet.
This expands the blind end of the rivet and then the mandrel snaps off.
These types of blind rivets have non-locking mandrels and are sometimes avoided for critical structural joints because the mandrels may fall out, due to vibration or other reasons, leaving a hollow rivet that has a lower load-carrying capability than solid rivets.
The blind rivets are mainly used when access to the joint is only available from one side.
1. Checking raw material before producing.
2. Checking one by one before the assebling
3. Checking one by one during the production
4. Have the random inspection before the delivery.
Welcome to inquiry us!