Rivet Nut Application

- Mar 27, 2019-

Technical guidelines for application:

1. The S series riveted nuts are made of free-cutting iron, which is treated after heat treatment. The CLS series riveted nuts are made of easy-to-use free-cutting stainless steel without surface treatment.

2, low carbon steel plate hardness must be less than 70RB, stainless steel plate hardness must be less than 80RB.

3. It is suitable for plates with various thicknesses. The minimum thickness is 0.8 mm. When using it, the tail number Z corresponding to the A size can be determined only according to the plate thickness and nut specification. The user selects samples and orders according to the plate thickness and the tail number in the table.

4, according to the aperture size to be accurately controlled, according to the tolerance of 0-+0.075mm size processing, it is best to punch, nut generally should be installed from the " disconnect" surface of the plate. The installation process is generally realized through " press riveting" operation and must not be impacted and knocked in.